Actualités

How Shipboard Reverse Osmosis Produces Fresh Water

logo Hoson

HOSON

At sea, the production rating is only useful if the plant can run when the vessel needs it. Your design basis has to connect freshwater demand with operating hours, feed conditions, electrical supply and room to service the equipment.

Set the daily duty before choosing capacity

List the consumers first: galley, showers, laundry, cleaning, machinery make-up and any process use. Then separate normal demand from reserve. Crew numbers, time underway and the freshwater already in storage change the duty; a single average-day figure hides those differences.

State the required product-water volume and the hours available to make it. A tonnes-per-day (TPD) rating is a production rate tied to a set of operating conditions. It does not tell you how much water will reach the tank during a shorter operating window. Salinity, temperature, fouling, intake pressure and electrical availability all affect the result, so include the expected seawater range in the brief.

Use the FSHB 5 figures as a fit check

The published FSHB 5 data can help screen a layout. It cannot replace a vessel-specific review of access, support and utilities. Check the route into the space as well as the final footprint; service access can be lost after nearby pipework and equipment are installed.

FSHB 5 reference

Published value

Question de conception

Freshwater output

5 tonnes per day

Under what feed and run conditions is this output specified?

Dimensions and dry weight

910 × 500 × 1,540 mm; about 260 kg

Is there room for connections, lifting and maintenance?

Rated power and supply

2.2 kW; AC 380 V, 50 Hz, three-phase

Does the vessel supply match, including auxiliary loads?

System recovery

Environ 20 %, selon la température et la qualité de l'eau

Can the intake and concentrate routes handle the flow?

The values above are published references for FSHB 5. At the stated approximate 20% recovery, a simple balance for 5 tonnes of product water is about 25 tonnes of feed and 20 tonnes of concentrate. This is arithmetic, not a measured voyage result. It assumes steady operation at that recovery and leaves out flushing. Keep those limits visible when reviewing intake and discharge capacity.

seawater-reverse-osmosis-membrane

Design around the feed the vessel will actually see

Seawater at the quay may differ from seawater offshore. A river mouth can bring more suspended material or biological loading; temperature shifts also affect operation. Ask what feed range the plant can accept and what measurements define that range. “Seawater” alone is not a useful specification.

The high-pressure stage pushes part of the feed through a membrane as permeate. Most dissolved salts leave with the concentrate. A seawater reverse osmosis membrane needs feed within its operating limits, compatible pretreatment and a cleaning plan. The membrane does not correct a poor intake design.

Vessel motion, salt exposure and limited access belong in the installation review too. Check supports, pipe routing, enclosure placement and access to components against the vessel arrangement. Required provisions depend on the installation and selected equipment; the word “marine” does not define a test scope or a guaranteed operating envelope.

Permeate also has a destination. Confirm whether it needs further conditioning or disinfection and how it will be stored hygienically for the intended use. Do not equate membrane permeate with water approved for every onboard purpose.

seawater-reverse-osmosis-system

Select pretreatment from the water analysis

The feed-water analysis should drive the pretreatment train. A strainer or cartridge filter may be enough for some conditions; another intake may call for dosing, multimedia filtration or ultrafiltration. Confirm the proposed sequence against the contaminants, membrane limits and chemical compatibility. Adding stages without that check can complicate operation without solving the actual feed problem.

Agree on commissioning readings before installation. Feed and product flow, pressure drop, conductivity and product-water quality give the crew a baseline. A rising pressure drop can indicate a restriction, but the location still needs diagnosis. Conductivity changes also need context: check pressure, seals, membrane condition and the sampling method before drawing a conclusion.

Un seawater reverse osmosis system should keep feed, permeate and concentrate paths distinct. If the proposed arrangement includes energy recovery, identify that equipment and its operating basis in the scope. The presence of a high-pressure pump does not confirm energy recovery.

HOSONWATER water treatment unit with a filter tank, stainless steel cabinet, control panel, and pressure gauges

Put service and acceptance into the purchase scope

Write down the start-up and flushing procedure, chemical handling, spare membranes and pump seals, sensor checks, alarm settings and operating records. Name the tasks the crew can do onboard and those that require shore support. That distinction matters when the vessel has a short maintenance window.

An integrated package can reduce assembly work aboard, but it does not remove installation checks. Plan for alignment, electrical verification, intake inspection and product-water testing after installation. Agree on the feed conditions and instruments for acceptance before the test; otherwise the readings may not answer whether the plant meets the agreed duty.

For a yacht, fishing vessel or workboat, our team can discuss a système d'osmose inverse marine against the required water balance, available power and installation envelope. The published FSHB 5 values are a starting reference. The project brief determines whether that configuration fits.

Take the operating basis into the review

Bring demand, reserve, operating hours, feed-water range, utilities and service clearance to the technical review. Include where the concentrate goes and how the crew will recognize a change in performance. Those details connect the capacity on a data sheet with the water the vessel can use.

FAQ (questions fréquentes)

What does a shipboard reverse osmosis plant produce?

It separates a portion of pressurized seawater as permeate while most dissolved salts leave in the concentrate. The permeate may need conditioning, disinfection and hygienic storage for its intended use.

Is 5 tonnes per day guaranteed for the FSHB 5?

Five tonnes per day is the published reference capacity. Actual production depends on feed-water conditions and operating time, among other factors. Confirm the conditions attached to the rating for your vessel before using it as a guaranteed daily volume.

How do I choose pretreatment for a marine RO plant?

Start with feed-water analysis and the selected membrane’s limits. Use those to decide whether screening, filtration or additional treatment is needed, and verify dosing compatibility. Do not assume every vessel needs the same train.

What electrical supply is listed for the FSHB 5?

The published reference lists AC 380 V, 50 Hz, three-phase and rated power of 2.2 kW. Check the vessel supply, starting requirements and auxiliary loads with the project team. Rated kW is power, not energy consumed per tonne.

What should a buyer include in a shipboard RO comparison?

Compare output against the same feed and run basis, then check footprint, mounting, electrical fit, concentrate routing, monitoring and service access. Also agree on commissioning conditions and acceptance readings. Without those boundaries, capacity figures may not be comparable.

Classification

Table des matières

    Nouvelles connexes

    How Shipboard Reverse Osmosis Produces Fresh Water
    How Shipboard Reverse Osmosis Produces Fresh Water
    Comment choisir le prétraitement pour l'osmose inverse d'eau de mer ?
    Comment choisir le prétraitement pour l'osmose inverse d'eau de mer ?
    Gestion durable de l'eau avec traitement modulaire
    Gestion durable de l'eau avec traitement modulaire

    FAQ (questions fréquentes)

    Bienvenue chez hoson Technology

    Bienvenue à Hesheng Technology. Face à une crise mondiale de l’eau, Hesheng Technology tire parti des membranes pour révolutionner la purification de l’eau dans tous les secteurs. Respecter la philosophie de base de “ Grande compassion, permettant le bénéfice de la technologie, ” Nous nous concentrons sur la maîtrise des technologies clés pour l'utilisation des ressources en eau, la construction d'un écosystème d'eau durable pour la civilisation industrielle et la survie humaine.

    Bienvenue à Hesheng Technology. Face à une crise mondiale de l’eau, Hesheng Technology tire parti des membranes pour révolutionner la purification de l’eau dans tous les secteurs. Respecter la philosophie de base de “ Grande compassion, permettant le bénéfice de la technologie, ” Nous nous concentrons sur la maîtrise des technologies clés pour l'utilisation des ressources en eau, la construction d'un écosystème d'eau durable pour la civilisation industrielle et la survie humaine.

    Bienvenue à Hesheng Technology. Face à une crise mondiale de l’eau, Hesheng Technology tire parti des membranes pour révolutionner la purification de l’eau dans tous les secteurs. Respecter la philosophie de base de “ Grande compassion, permettant le bénéfice de la technologie, ” Nous nous concentrons sur la maîtrise des technologies clés pour l'utilisation des ressources en eau, la construction d'un écosystème d'eau durable pour la civilisation industrielle et la survie humaine.

    Produits connexes

    Contactez nos spécialistes OEM/ODM Maintenant

    Contactez nos spécialistes OEM/ODM Maintenant

    Parlez-nous de votre idée initiale, et nous vous fournirons une analyse de faisabilité préliminaire et des recommandations dans un jour ouvrable.